#!/bin/bash # test we are root if [ "$(id -u)" != "0" ]; then echo "run as root now exitting" exit 1 fi # due to meson recreate missing la file ######################################## cat >> /usr/local/lib/libatk-1.0.la <<'EOF' # libatk-1.0.la - a libtool library file # Generated by libtool (GNU libtool) 2.4.6 Debian-2.4.6-0.1 # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='libatk-1.0.so.0' # Names of this library. library_names='libatk-1.0.so.0.22810.1 libatk-1.0.so.0 libatk-1.0.so' # The name of the static archive. old_library='' # Linker flags that cannot go in dependency_libs. inherited_linker_flags='' # Libraries that this one depends upon. dependency_libs=' -L/usr/local/lib /usr/local/lib/libgobject-2.0.la /usr/local/lib/libffi.la /usr/local/lib/libglib-2.0.la /usr/local/lib/libpcre.la -lpthread' # Names of additional weak libraries provided by this library weak_library_names='' # Version information for libatk-1.0. current=22810 age=22810 revision=1 # Is this an already installed library? installed=yes # Should we warn about portability when linking against -modules? shouldnotlink=no # Files to dlopen/dlpreopen dlopen='' dlpreopen='' # Directory that this library needs to be installed in: libdir='/usr/local/lib' EOF CFLAGS="-mtune=generic -Os -pipe" CXX="g++ -flto -fuse-linker-plugin -mtune=generic -Os -pipe \ -fno-exceptions -fno-rtti" P=gutenprint PPD=$P-ppd V=5.3.1 SRC=$P-$V USER=`cat /etc/sysconfig/tcuser` LIST="compiletc submitqc cups2-dev gettext ijs-dev libusb-dev xz" for Z in $LIST do su -c "tce-load -i $Z" $USER done cd /tmp su -c "/usr/local/bin/wget -nc --no-check-certificate \ https://sourceforge.net/projects/gimp-print/files/$P-5.3/$V/$SRC.tar.xz" $USER xz -d $SRC*xz && tar xvf $SRC.tar cd $SRC # based on --disable-static giving this warning... # WARNING: Use of --disable-static-genppd or --disable-static # when building CUPS is very dangerous ./configure --prefix=/usr/local --with-cups=/usr/local --enable-simplified-cups-ppds #################################################### # -------Features: # Build CUPS: yes, installing in /usr/local # Build CUPS 1.2 enhancements: yes # Build CUPS PPD files: no # Generate PS level 3 CUPS PPD files: yes # Build genppd statically: yes # Build CUPS dyesub USB backend: yes # Build EPSON inkjet utility: yes # Build enhanced Print plugin for GIMP: no # Build test programs: yes # Build testpattern generator: yes # -------- Installation summary: # Installation prefix: /usr/local # Exec prefix: /usr/local (${prefix}) # Data directory: /usr/local/share/gutenprint # Library directory: /usr/local/lib/gutenprint (/usr/local/lib/gutenprint)# # Executable directory: /usr/local/bin (/usr/local/bin) # XML data directory: /usr/local/share/gutenprint/5.3/xml # Module directory: /usr/local/lib/gutenprint/5.3/modules (/usr/local/lib/gutenprint/5.3/modules) # Install sample images: yes # ---------General configuration: # Compiler: gcc # Compiler Version: gcc version 7.2.0 (GCC) # Compiler options: -Disfinite=finite -O3 -Wmissing-prototypes -Wmissing-declarations\ ## -Wnested-externs -Wwrite-strings -Werror-implicit-function-declaration -Winline -Wformat=2 -finline-limit=131072 # Build static libraries: yes # Build shared libraries: yes # Maintainer mode: no # Use i18n: yes # Generate profiling information: no # Generate debugging symbols: no # Use modules: static # Use readline libraries: yes #### make takes about 30 seconds using -j9 while make check took years so... make -j9 mkdir /tmp/$P make install-strip DESTDIR=/tmp/$P cd /tmp # locale ######### mkdir -p $P-locale/usr/local/share mv $P/usr/local/share/locale $P-locale/usr/local/share # dev ##### mkdir -p $P-dev/usr/local/lib/ mv $P/usr/local/include $P-dev/usr/local/ mv $P/usr/local/lib/pkgconfig $P-dev/usr/local/lib/ mv $P/usr/local/lib/*a $P-dev/usr/local/lib/ chmod 644 $P-dev/usr/local/lib/*a # doc ###### samples to remain in main this build # make-install-output installed a different pathway to doc mkdir -p $P-doc/usr/local/share/doc mv $P/usr/local/share/man $P-doc/usr/local/share mv $P/usr/local/share/$P/doc $P-doc/usr/local/share/doc/$P ####### # main ###### mkdir -p $P/usr/local/share/doc/$P echo 'see doc tcz for COPYING' > $P/usr/local/share/doc/$P/COPYING # needed for PPD generation command mkdir -p $P/usr/local/share/cups/model/gutenprint/5.3 GP=$P/usr/local/bin/generate-ppd.sh cat >> $GP <<'EOF' #!/bin/sh # test we are root if [ "$(id -u)" != "0" ]; then echo "run as root now exitting" exit 1 fi # to resolve previous Error from http://localhost:631/admin/log/error_log # = Unable to open listen socket for address [v1.::1]:631 (etc) CONF=/usr/local/etc/cups/cupsd.conf LOOP=/tmp/tcloop/cups2/usr/local/etc/cups/cupsd.conf.default rm -rf $CONF cp $LOOP $CONF sed 's|localhost:631|127.0.0.1:631|' -i $CONF # generate the ppds and start cups echo 'generation of ppds takes about one minute uncompressed PPDs can be viewed here /usr/local/share/cups/model/gutenprint/5.3' /usr/local/sbin/cups-genppd.5.3 -Z /usr/local/etc/init.d/cups restart EOF chown root:staff $GP chmod 755 $GP # TCZ them ####### LIST="$P $P-doc $P-dev $P-locale " for Z in $LIST do mksquashfs $Z $Z.tcz md5sum $Z.tcz > $Z.tcz.md5.txt cd $Z find usr -not -type d > /tmp/$Z.tcz.list sed 's|usr|/usr|g' -i /tmp/$Z.tcz.list cd /tmp done ls -hal echo 'gutenprint.tcz cups2-dev.tcz gettext.tcz ijs-dev.tcz libusb-dev.tcz xz.tcz ' > $P-dev.tcz.dep echo 'cups2.tcz libusb.tcz ijs.tcz ghostscript.tcz gnutls35.tcz' > $P.tcz.dep echo 'gutenprint.tcz' > $P-locale.tcz.dep echo 'man-db.tcz' > $P-doc.tcz.dep echo 'Title: gutenprint.tcz Description: printer drivers for most printers Version: 5.3.1 Author: see -doc/AUTHORS Original-site: https://sourceforge.net/projects/gimp-print/ Copying-policy: GPL v2 Size: 4.9M Extension_by: aus9 at gmx dot com Tags: cups printer ppd Comments: To know if gutenprint is suitable, the list of printers can be searched here http://gimp-print.sourceforge.net/p_Supported_Printers.php UPGRADERS---please delete all persistent files except your root pw ######## ---reboot and then start again Optional dependency load colord.tcz to reduce warnings in error log. Printing still works without it. Wireless (WL) Printing ############# For my Canon MG 3060 I found I did not need avahi loaded YMMV. You may need avahi loaded and its daemon started but note that on first use, you must run the generate-ppd command before starting avahi. WL ink levels can be checked by using your web browser to go to your static ip for your wl printer eg 192.168.1.7 -- once the printer is set up Epson ink levels, once printer is set up ############ tested on usb cable model TX100 $ tce-load -wi readline # escputil -i --raw-device /dev/usb/lp0 Extra printer calibration ################### $ sudo cups-calibrate (and enter only numbers as directed after viewing the test page) Preview ######## Needs evince.tcz to preview. Tested on leafpad. How to use after reading above ########### $ tce-load -i gutenprint First time use or if you have not saved the files ############## The generate-ppd.sh starts cups but will not load avahi $ sudo generate-ppd.sh Next, /usr/local/etc/cups is owned by root so set up a root password $ sudo passwd Next, open your web browser to http://localhost:631/admin Do NOT click on "Find New Printer", instead click on Add Printer Then make your selection. Remember to click the "Add Printer" button to then get options to change paper size etc. At some point in that process either at the beginning or after selecting your model, a popup will ask for user, input root and your new password please. Next (recommended) pulldown administration and make your printer the server default. Then test printer. $ tce-load -i avahi (and start it if wl printer not detected) For persistence ################ (1) Add these lines to /opt/.filetool.lst etc/shadow usr/local/etc/cups/cupsd.conf usr/local/etc/cups/printers.conf usr/local/etc/cups/ppd/Canon_MG3000_series.ppd (change to your PPD) (2) You can choose to add gutenprint.tcz to your boot.lst depending on how frequent you think you might do printing. On reboot ########## Assuming you have done the persistence suggestions, load gutenprint and then start cups with $ sudo /usr/local/etc/init.d/cups start and if you are using a WL printer and need avahi $ sudo /usr/local/etc/init.d/avahi start ####################### NO MATCHING MODEL FOUND ###################### If you are not sure which PPD is best for you, uncompressed PPDs are created at /usr/local/share/cups/model/gutenprint/5.2 before rebooting and loosing all of them except your persistent ones, you may like to copy some into your home dir. CUPS allows you to try a PPD from a non-system pathway.....but for gutenprint it needs to have been designed for that version of gutenprint. It may take a few tries where you can not find your exact model listed. Good Luck! eg you have make Z model 142 so try model 140 then 100 etc cups also supplies generic models but these tend to be a bit limited Optional dep for usb trouble-shooting=usb-utils for command lsusb Compiled for 10x Change-log: 2018/06/17 first version Current: 2019/01/04 v 5.2.14 -> 5.3.1 add simplified PPD option ' > $P.tcz.info echo 'Title: gutenprint-dev.tcz Description: dev files Version: 5.3.1 Author: see -doc/AUTHORS Original-site: https://sourceforge.net/projects/gimp-print/ Copying-policy: GPL v2 Size: 880K Extension_by: aus9 at gmx dot com Tags: cups printer ppd Comments: Development files Compiled for 10x Change-log: 2018/06/17 first version Current: 2019/01/04 v 5.2.14 -> 5.3.1 add simplified PPD option ' > $P-dev.tcz.info echo 'Title: gutenprint-locale.tcz Description: locale files Version: 5.3.1 Author: see -doc/AUTHORS Original-site: https://sourceforge.net/projects/gimp-print/ Copying-policy: GPL v2 Size: 3.3M Extension_by: aus9 at gmx dot com Tags: cups printer ppd Comments: locales not tested by me Compiled for 10x Change-log: 2018/06/17 first version Current: 2019/01/04 v 5.2.14 -> 5.3.1 add simplified PPD option ' > $P-locale.tcz.info echo 'Title: gutenprint-doc.tcz Description: man pages and docs Version: 5.3.1 Author: see -doc/AUTHORS Original-site: https://sourceforge.net/projects/gimp-print/ Copying-policy: GPL v2 Size: 2.0M Extension_by: aus9 at gmx dot com Tags: cups printer ppd Comments: Note sub-directory to doc dir --reference-html...navigate your web browser to book1.html if you are interested in the "Developer Guide" Compiled for 10x Change-log: 2018/06/17 first version Current: 2019/01/04 v 5.2.14 -> 5.3.1 add simplified PPD option ' > $P-doc.tcz.info submitqc --libs