getfem_crack_sif.h

Go to the documentation of this file.

/* -*- c++ -*- (enables emacs c++ mode) */
/*===========================================================================
 
 Copyright (C) 2007-2020 Yves Renard,  Julien Pommier
 
 This file is a part of GetFEM
 
 GetFEM  is  free software;  you  can  redistribute  it  and/or modify it
 under  the  terms  of the  GNU  Lesser General Public License as published
 by  the  Free Software Foundation;  either version 3 of the License,  or
 (at your option) any later version along with the GCC Runtime Library
 Exception either version 3.1 or (at your option) any later version.
 This program  is  distributed  in  the  hope  that it will be useful,  but
 WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
 or  FITNESS  FOR  A PARTICULAR PURPOSE.  See the GNU Lesser General Public
 License and GCC Runtime Library Exception for more details.
 You  should  have received a copy of the GNU Lesser General Public License
 along  with  this program;  if not, write to the Free Software Foundation,
 Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301, USA.
 
 As a special exception, you  may use  this file  as it is a part of a free
 software  library  without  restriction.  Specifically,  if   other  files
 instantiate  templates  or  use macros or inline functions from this file,
 or  you compile this  file  and  link  it  with other files  to produce an
 executable, this file  does  not  by itself cause the resulting executable
 to be covered  by the GNU Lesser General Public License.  This   exception
 does not  however  invalidate  any  other  reasons why the executable file
 might be covered by the GNU Lesser General Public License.
 
===========================================================================*/
 
/**@file getfem_crack_sif.h
   @author  Julien Pommier
   @date July 2007
   @brief crack support functions for computation of SIF
          (stress intensity factors)
*/
 
#ifndef GETFEM_CRACK_SIF_H
#define GETFEM_CRACK_SIF_H
 
#include "getfem/getfem_mesh.h"
#include "getfem/getfem_mesh_fem_global_function.h"
#include "getfem/getfem_assembling_tensors.h"
#include "getfem/getfem_level_set.h"
 
namespace getfem {
  /* build a "ring" of convexes of given center and radius */
  inline dal::bit_vector 
  build_sif_ring_from_mesh(const mesh &m, 
                           base_node center, scalar_type r) {
    dal::bit_vector bv;
    scalar_type r2 = r - 1e-4;
    unsigned in = 0;
    for (dal::bv_visitor cv(m.convex_index()); !cv.finished(); ++cv) {
      unsigned in1=0, out1=0;
      unsigned in2=0, out2=0;
      for (unsigned i=0; i < m.nb_points_of_convex(cv); ++i) {
        base_node P = m.points_of_convex(cv)[i];
        if (gmm::vect_dist2(P, center) < r) ++in1; else ++out1;
        if (gmm::vect_dist2(P, center) < r2) ++in2; else ++out2;
      }
      if ((in1 && out1) || (in2 && out2)) bv.add(cv);
      in += in1;
    }
    if (in < 3) GMM_WARNING1("looks like the radius is too small...");
    return bv;
  }
 
  /* return the crack tip in P,
     and the outgoing tangent of the crack in T,
     and the normal in N */
  inline void get_crack_tip_and_orientation(const level_set &/* ls */,
                                     base_node &P, 
                                     base_small_vector &T, base_small_vector &N) {
    cerr << __PRETTY_FUNCTION__ << " IS TO BE DONE\n";
    /* too lazy to do it now */
    P.resize(2); P[0] = .5; P[1] = 0;
    T.resize(2); T[0] = 1; T[1] = 0;
    N.resize(2); N[0] = 0; N[1] = 1;
  }
 
 
  /* compute with great precision the stress intensity factors using
     integral computed on a ring around the crack tip */
  template <typename VECT>
  void compute_crack_stress_intensity_factors(const level_set &ls,
                                              const mesh_im &mim,
                                              const mesh_fem &mf, 
                                              const VECT &U,
                                              scalar_type ring_radius, 
                                              scalar_type lambda, scalar_type mu, 
                                              scalar_type young_modulus, 
                                              scalar_type &KI, scalar_type &KII) {
    const mesh &mring = mim.linked_mesh();
    mesh_fem_global_function mf_mode(mring, 1);
    mesh_fem mf_q(mring,1);
    
    std::vector<pglobal_function> cfun(4);
    for (unsigned j=0; j < 4; ++j) {
      auto s = std::make_shared<crack_singular_xy_function>(j);
      cfun[j] = global_function_on_level_set(ls, s);
    }
    mf_mode.set_functions(cfun);
    mf_mode.set_qdim(2);
    
    mf_q.set_classical_finite_element(1);
 
    base_node crack_tip;
    base_small_vector T, N;
    get_crack_tip_and_orientation(ls, crack_tip, T, N);
 
    dal::bit_vector cvring = build_sif_ring_from_mesh(mring, crack_tip, 
                                                      ring_radius);
 
    /* fill the "q" ring field with a approximately linear field, equal to 
       1 on the inner boundary, and equal to zero on the outer boundary */
    std::vector<scalar_type> q(mf_q.nb_basic_dof());
    for (unsigned d = 0; d < mf_q.nb_basic_dof(); ++d) {
      base_node P = mf_q.point_of_basic_dof(d);
      q[d] = (gmm::vect_dist2(P, crack_tip) > ring_radius) ? 0 : 1;
    }
 
    base_vector U_mode(mf_mode.nb_dof()); assert(U_mode.size() == 8);
      
    /* expression for SIF computation taken from "a finite element
       method for crack growth without remeshing", moes, dolbow &
       belytschko */
 
    generic_assembly 
      assem("lambda=data$1(1); mu=data$2(1); x1=data$3(mdim(#1)); "
            "U1=data$4(#1); U2=data$5(#2); q=data$6(#3);"
            "t=U1(i).U2(j).q(k).comp(vGrad(#1).vGrad(#2).Grad(#3))(i,:,:,j,:,:,k,:);"
            "e1=(t{1,2,:,:,:}+t{2,1,:,:,:})/2;"
            "e2=(t{:,:,3,4,:}+t{:,:,4,3,:})/2;"
            "e12=(e1{:,:,3,4,:}+e1{:,:,4,3,:})/2;"
            "V()+=2*mu(p).e1(i,j,i,k,j).x1(k) + lambda(p).e1(i,i,j,k,j).x1(k);"
            "V()+=2*mu(p).e2(i,k,i,j,j).x1(k) + lambda(p).e2(j,k,i,i,j).x1(k);"
            "V()+=-2*mu(p).e12(i,j,i,j,k).x1(k) - lambda(p).e12(i,i,j,j,k).x1(k);");
    assem.push_mf(mf);
    assem.push_mf(mf_mode);
    assem.push_mf(mf_q);
    assem.push_mi(mim);
    base_vector vlambda(1); vlambda[0] = lambda;
    base_vector vmu(1); vmu[0] = mu;
    assem.push_data(vlambda); 
    assem.push_data(vmu); 
    assem.push_data(T); // outgoing tangent of the crack
    assem.push_data(U); 
    assem.push_data(U_mode);
    assem.push_data(q);
    base_vector V(1);
    assem.push_vec(V);
 
    /* fill with the crack opening mode I or mode II */
    for (unsigned mode = 1; mode <= 2; ++mode) {
      base_vector::iterator it = U_mode.begin();
      scalar_type coeff=0.;
      switch(mode) {
        case 1: {
          scalar_type A=2+2*mu/(lambda+2*mu), B=-2*(lambda+mu)/(lambda+2*mu);
          /* "colonne" 1: ux, colonne 2: uy */
          *it++ = 0;       *it++ = A-B; /* sin(theta/2) */
          *it++ = A+B;     *it++ = 0;   /* cos(theta/2) */
          *it++ = -B;      *it++ = 0;   /* sin(theta/2)*sin(theta) */ 
          *it++ = 0;       *it++ = B;   /* cos(theta/2)*cos(theta) */
          coeff = 1/sqrt(2*M_PI);
        } break;
        case 2: {
          scalar_type C1 = (lambda+3*mu)/(lambda+mu); 
          *it++ = C1+2-1;   *it++ = 0;
          *it++ = 0;      *it++ = -(C1-2+1);
          *it++ = 0;      *it++ = 1;
          *it++ = 1;      *it++ = 0;
          coeff = 2*(mu+lambda)/(lambda+2*mu)/sqrt(2*M_PI);
        } break;
      }
      gmm::scale(U_mode, coeff/young_modulus);
      V[0] = 0.;
      cout << "assemblig SIFs ..." << std::flush; 
      double time = gmm::uclock_sec();
      assem.assembly(cvring);
      cout << "done (" << gmm::uclock_sec()-time << " sec)\n";
      V[0] *= young_modulus/2; /* plane stress only, should be E/(2*(1-nu)) for plane strain */
      if (mode == 1) KI = V[0]; else KII = V[0];
    }
  }
 
  /* return a (very rough) estimate of the stress intensity factors using 
     the local displacement near the crack tip */
  template <typename VECT> 
  void estimate_crack_stress_intensity_factors(const level_set &ls,
                                               const mesh_fem &mf, const VECT &U, 
                                               scalar_type young_modulus, 
                                               scalar_type &KI, 
                                               scalar_type &KII, double EPS=1e-2) {
    base_node P(2);
    base_small_vector T(2),N(2); 
    get_crack_tip_and_orientation(ls, P, T, N);
    base_node P1 = P - EPS*T + EPS/100.*N;
    base_node P2 = P - EPS*T - EPS/100.*N;
    std::vector<double> V(4);
    getfem::mesh_trans_inv mti(mf.linked_mesh());
    mti.add_point(P1);
    mti.add_point(P2);
    cout << "P1 = " << P1 << ", P2=" << P2 << "\n";
    base_matrix M;
    getfem::interpolation(mf, mti, U, V, false);
    KI = (V[1] - V[3])/sqrt(EPS/(2*M_PI)) * young_modulus / 8.0;
    KII = (V[0] - V[2])/sqrt(EPS/(2*M_PI)) * young_modulus / 8.0;
  }
}
 
#endif // GETFEM_CRACK_SIF_H