Table of Known OIDS

This File Contains a collection of interesting MIB Entries ...
mrtg knows about their names ... depending on the ASN.1 Syntax,
must use Options[]: absolute to make things work ...


Descriptor:		ifOperStatus 
Identifier:		1.3.6.1.2.1.2.2.1.8 
ASN.1 Syntax:		INTEGER 
Enumeration:		up 1, down 2, testing 3 

The current operational state of the interface. 
The testing(3) state indicates that no operational 
packets can be passed. 

Descriptor:		ifAdminStatus 
Identifier:		1.3.6.1.2.1.2.2.1.7 
ASN.1 Syntax:		INTEGER 
Enumeration:		up 1, down 2, testing 3 

The current administrative state of the interface. 
The testing(3) state indicates that no operational 
packets can be passed. 
 
Descriptor:		ifInOctets 
Identifier:		1.3.6.1.2.1.2.2.1.10 
ASN.1 Syntax:		Counter32 
 
The total number of octets received on the 
interface, including framing characters. 
 
Descriptor:		ifInUcastPkts 
Identifier:		1.3.6.1.2.1.2.2.1.11 
ASN.1 Syntax:		Counter32 
 
The number of subnetwork-unicast packets 
delivered to a higher-layer protocol. 
 
Descriptor:		ifInNUcastPkts 
Identifier:		1.3.6.1.2.1.2.2.1.12 
ASN.1 Syntax:		Counter32 
 
The number of non-unicast (i.e., subnetwork- 
broadcast or subnetwork-multicast) packets 
delivered to a higher-layer protocol. 
 
Descriptor:		ifInDiscards 
Identifier:		1.3.6.1.2.1.2.2.1.13 
ASN.1 Syntax:		Counter32 
 
The number of inbound packets which were chosen 
to be discarded even though no errors had been 
detected to prevent their being deliverable to a 
higher-layer protocol.  One possible reason for 
discarding such a packet could be to free up 
buffer space. 
 
Descriptor:		ifInErrors 
Identifier:		1.3.6.1.2.1.2.2.1.14 
ASN.1 Syntax:		Counter32 
 
The number of inbound packets that contained 
errors preventing them from being deliverable to a 
higher-layer protocol. 
 
Descriptor:		ifInUnknownProtos 
Identifier:		1.3.6.1.2.1.2.2.1.15 
ASN.1 Syntax:		Counter32 
 
The number of packets received via the interface 
which were discarded because of an unknown or 
unsupported protocol. 
 
Descriptor:		ifOutOctets 
Identifier:		1.3.6.1.2.1.2.2.1.16 
ASN.1 Syntax:		Counter32 
 
The total number of octets transmitted out of the 
interface, including framing characters. 
 
Descriptor:		ifOutUcastPkts 
Identifier:		1.3.6.1.2.1.2.2.1.17 
ASN.1 Syntax:		Counter32 
 
The total number of packets that higher-level 
protocols requested be transmitted to a 
subnetwork-unicast address, including those that 
were discarded or not sent. 
 
Descriptor:		ifOutNUcastPkts 
Identifier:		1.3.6.1.2.1.2.2.1.18 
ASN.1 Syntax:		Counter32 
 
The total number of packets that higher-level 
protocols requested be transmitted to a non- 
unicast (i.e., a subnetwork-broadcast or 
subnetwork-multicast) address, including those 
that were discarded or not sent. 
 
Descriptor:		ifOutDiscards 
Identifier:		1.3.6.1.2.1.2.2.1.19 
ASN.1 Syntax:		Counter32 
 
The number of outbound packets which were chosen 
to be discarded even though no errors had been 
detected to prevent their being transmitted.  One 
possible reason for discarding such a packet could 
be to free up buffer space. 
 
Descriptor:		ifOutErrors 
Identifier:		1.3.6.1.2.1.2.2.1.20 
ASN.1 Syntax:		Counter32 
 
The number of outbound packets that could not be 
transmitted because of errors. 
 
Descriptor:		ifOutQLen 
Identifier:		1.3.6.1.2.1.2.2.1.21 
ASN.1 Syntax:		Unsigned32 
 
The length of the output packet queue (in 
packets). 

##
## Usersupplied stuff
##
-----
From: Simon Ferrett <simonf@world.net>

    'frInOctets' => '1.3.6.1.2.1.10.32.2.1.9'
    'frOutOctets' => '1.3.6.1.2.1.10.32.2.1.7'

which when used in the form:

frInOctets.pp.dd&frOutOctets.pp.dd:community@cisco.router

where pp is the physical port that the frame relay pvc is
defined on and dd is the DLCI of the pvc gets you the in
and out octets for just that pvc.

##
## ifAdminHack and ifOperHack by Tobias Oetiker
##
---
The return values of ifAdminStatus and ifOperStatus are not very usefull 
for graphing. Use ifOperHack and ifAdminHack instead. They return 1 for 
UP and 0 otherwise.
---
