1.2.0pre6

  * Portslave now toggles the DTR line when opening the serial port.
    It previously relied on the externally spawned program to close
    the connection. PPPD would close the line fine. SLIP, Rlogin,
    or a non-autoppp password failure would NOT. (Bug IMHO)
  * Search services file for radius and radacct ports.
  * Session-Timeout support, to limit the maximum connection time.
  * New 'big utmp' format (when using libc6 or similar)
  	Entire IP stored in utmp, as well as connect string.
  * Update utmp with:
		user:'Incoming'  status:'HANKSHAKE' (modem answer)
		user:'Connected' status:connect string (speed)
  * Changed ctlportslave to work with utmp 'status' messages.
  * Changed ctlportslave to report actual type when called as 'finger' 
    instead of just 'Network'.
  * New ctlportslave view, 'detailed'
  * New password option for ctlportslave as fingerd.
  * New reset ports option for ctlportslave as fingerd.
  * Filter ID patch added.
  * Portslave no longer depends on the external program stty.
  * Compiler routines optimized. (No debug. Binaries now smaller)
  * Various minor bug fixes.
  * PPP 2.3.7

portslave (1.17) cistron; urgency=low

   * Added ppp 2.3.5 support.
   * Change names of pppd, /etc/ppp, and rlogin to *-radius
   * Change default paths of binaries and config file
   * Updated install.sh	

-- Dave Cinege <dcinege@psychosis.com>  Tue, 03 Nov 1998 07:57:00 -0500

portslave (1.16) cistron; urgency=low

   * Build autoppp part of portslave as shared lib, linked in on-demand
     by ppp-2.2.0f.
   * Added MD5 auth for accounting packets;
     thanks to Eric Stern <estern@squall.mgl.ca>
   * Fixed bug in Reply-Message handling. Or actually, string handling
     in general. Thanks to Jens Glaser <jens@regio.net>
   * Now logs everything after CONNECT to radius with Connect-Info.
   * Added "porttype" configuration variable, based on a suggestion
     from Carl Privitt <cprivitt@granite.sage.net>.
   * Check for Framed-Protocol = PPP after authentication in pppd
   * Fix comment handling of config file parser
   * Added RADIUS logging of sent/recv octets for PPP
     This should now work reliably minus 1 or 2 seconds before hangup.
   * Added ctlportslave utility. Can be used as shell for `!root', adds
     portmaster-like command line admin interface. Very simplistic
     but useful for packages like pmmon.
   * Fixed length field of IP address / integer (was 6 instead of 4)
     Do not include trailing '\0' in strings.
   * Now also compiles with GNU libc (aka libc6). Diffs submitted by
     <chuck@innet.com>.
   * Added conf.stripnames option

 -- Miquel van Smoorenburg <miquels@cistron.nl>  Thu, 22 Jan 1998 12:13:46 +0100

portslave (1.15) cistron; urgency=low

   * lib.c:getline() now accepts \r, \r\n, \n as end-of-line.
   * getty:login() turns off input CRNL translation
   * Added new feature: portslave can now emulate a modem. Set
     "sXX.emumodem 1" to enable this feature.
   * Add support for updating local utmp and wtmp files.
   * Add support for radius Idle-Timeout attribute

 -- Miquel van Smoorenburg <miquels@cistron.nl>  Thu, 5 Jun 1997 20:49:21 +0200

portslave (1.14) cistron; urgency=low

   * Added copyright notice to README (GPL)
   * Add note about ripd to README
   * Change default MTU in sample server.cfg to 1500 - some PPP implementations
     have trouble with fragmentation.

 -- Miquel van Smoorenburg <miquels@cistron.nl>  Wed, 7 May 1997 13:57:32 +0200

portslave (1.13) cistron; urgency=low

   * Added CREAD to the c_cflag initialization. This should fix the digiboards.
     (Fix by Jean-Francois Micouleau <Jean-Francois.Micouleau@utc.fr>)
   * Added telnet support. Maybe also pass username if known?

 -- Miquel van Smoorenburg <miquels@cistron.nl>  Thu, 24 Apr 1997 21:36:16 +0200

portslave (1.12) cistron; urgency=high

   * Now sends accounting requests to the radius accounting port (1646)
     instead of the authentication port (1645) - funny that nobody found
     this obvious bug yet (and that it actually _worked_ ..)
   * Some extra info added to server.cfg
   * Remove MRU settings; use MTU for both MTU and MRU
   * Fix '-' argument

  -- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 6 Feb 1997 22:22:16 +0100

portslave (1.11) cistron; urgency=low

  * Added comment in server.cfg about "stuck in negotation" loop that
    ppp-2.2.0f can get into with leased lines, with a workaround. It
    seems to work for a lot of people except me :(. Under investigation.
  * Fix for syslog() not working on port 0: Jens Glaser <jens@glaser.com>

  -- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 14 Nov 1996 13:45:53 +0100

portslave (1.10) cistron; urgency=high

  * Fixed SLIP/CSLIP support that I broke in 1.0.8 or so.

 -- Miquel van Smoorenburg <miquels@cistron.nl>  Mon, 29 Oct 1996 15:41:32 +0100

portslave (1.09) cistron; urgency=low

  * Fixed leased-line support (again; must have misplaced a part of
    some previous changes)

 -- Miquel van Smoorenburg <miquels@cistron.nl>  Mon, 22 Oct 1996 11:59:21 +0200

portslave (1.08) cistron; urgency=low

  * Fixed local syslog logging
  * Fixed portslave-over-telnet
  * Added debug option, standard turned off.

 -- Miquel van Smoorenburg <miquels@cistron.nl>  Mon, 14 Oct 1996 18:12:57 +0200

portslave (1.07a) cistron; urgency=low

  * Removed the nonsense about pap-secrets.

 -- Miquel van Smoorenburg <miquels@cistron.nl>  Mon, 08 Oct 1996 18:02:16 +0200

portslave (1.07) cistron; urgency=low

  * Fixed the sample server.cfg file; it had a few typos and missing
    features (esp. the leased-line example)
  * Fixed leased-line support
  * Note about /etc/ppp/pap-secrets in README

 -- Miquel van Smoorenburg <miquels@cistron.nl>  Mon, 07 Oct 1996 13:28:21 +0200

portslave (1.06) cistron; urgency=low

  * Added support for portslave - over - telnetd. portslave now checks if
    the first argument starts with '-'. If so, it uses ttyname(0) to find
    the right entry in the server.cfg file.

 -- Miquel van Smoorenburg <miquels@cistron.nl>  Wed, 02 Oct 1996 16:54:29 +0200

portslave (1.05) cistron; urgency=high

  * Fixed CLOCAL stuff (only ever set if port.dcd is 0). This works around
    a bug in the Comtrol Rocketport driver.
  * Added ChangeLog file.

 -- Miquel van Smoorenburg <miquels@cistron.nl>  Tue, 01 Oct 1996 17:06:40 +0200

