Turn the camera off 
   </PRE
></TD
></TR
></TABLE
></DIV
><DIV
CLASS="SECT3"
><H3
CLASS="SECT3"
><A
NAME="AEN2042"
>4.1.3. Usage Examples</A
></H3
><P
>    USB:  
   </P
><P
>    Special USB notes. The USB stack has been ever changing in the developmental kernels and as such works differently from time to time. In playing with the latest developmental kernel released the camera tends to show up on /dev/dc2xx0 or /dev/dc2xx1, independent of the fact that only one camera is connected. The support for these devices is all fairly new, so expect to have to play with it to get it working. The following should allow one to download all images from the camera to the working directory with a USB connection. Make sure that the camera is in connect mode. 
   </P
><TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><PRE
CLASS="PROGRAMLISTING"
>bash$ ks -d /dev/dc2xx0 download
   </PRE
></TD
></TR
></TABLE
><P
>    Serial: 
   </P
><P
>    Serial support does work and as such the following command should allow one to download all images from the camera into their current working directory. Modify the serial port device name as necessary. Ensure that the camera is on and in connect mode and that the serial cable is connected between the computer's serial port and the camera.
   </P
><TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><PRE
CLASS="PROGRAMLISTING"
>bash$ ks -d /dev/ttyS0 download 
   </PRE
></TD
></TR
></TABLE
><P
>    IrDA: 
   </P
><P
>    IrDA is not supported in the release version of OpenDiS, however support has been added to the CVS version. To obtain the latest version of OpenDiS via CVS run the following (hit the enter key at the password prompt, there is no password):
   </P
><TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><PRE
CLASS="PROGRAMLISTING"
>bash$ cvs -d:pserver:anonymous@cvs.ods.sourceforge.net:/cvsroot/ods login
bash$ cvs -d:pserver:anonymous@cvs.ods.sourceforge.net:/cvsroot/ods checkout bash# bash$ ods/opendis-current
   </PRE
></TD
></TR
></TABLE
><P
>    To compile and configure this version do the following:
   </P
><TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><PRE
CLASS="PROGRAMLISTING"
>bash$ cd ods
bash$ cd opendis-current
bash$ ./configure
bash$ make
bash# make install
   </PRE
></TD
></TR
></TABLE
><P
>    An example command which will download all the images from the camera via IrDA would look as follows. Remember to have the camera on and in connect mode. It may also be advisable to increase the auto-shutoff feature to a larger value (5 minutes if possible).
   </P
><TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><PRE
CLASS="PROGRAMLISTING"
>bash$ ks -d /dev/ircomm0 download
   </PRE
></TD
></TR
></TABLE
></DIV
></DIV
><DIV
CLASS="SECT2"
><H2
CLASS="SECT2"
><A
NAME="AEN2057"
>4.2. Digita Operating Environment- Command Device Protocol Python Script</A
></H2
><P
>   This Python script written by Sai Lai Lo of AT&#38;T Cambridge Laboratories allows for download 
  </P
><P
>   of images from Kodak Digital Cameras running DigitaOS (DC220, DC260,