XFree86 Font De-uglification HOWTO

Hal Burgiss

hal@foobox.net


Original Author: Doug Holland

meldroc@frii.com


v1.8, 25 June 2001


How to improve ugly and unreadable X Window fonts. Various tips for improving
font handling for XFree86, including sections on font servers, TrueType
fonts, Netscape, and related topics.

-----------------------------------------------------------------------------
Table of Contents
1. Introduction
    1.1. Conventions Used in this Document
    1.2. Change Log and What's New
    1.3. New Versions
    1.4. Copyright
    1.5. Credits
    1.6. Translations
   
   
2. X Server Configuration
    2.1. Setting The FontPath
    2.2. X Server Command Line Options
   
   
3. TrueType Fonts (One of the few things Windows is good for)
    3.1. Making TrueType Fonts Available
    3.2. Font Servers
        3.2.1. xfstt
            3.2.1.1. Installation
            3.2.1.2. Adjusting the Default Font Size
           
           
        3.2.2. Redhat's xfs
            3.2.2.1. Setting the xfs FontPath
            3.2.2.2. Getting the Fonts Ready
           
           
       
       
    3.3. xfsft
    3.4. The fonts.alias File
   
   
4. XFree86 4.x
    4.1. Anti-aliasing
        4.1.1. Requirements
        4.1.2. Installation
        4.1.3. Xft Configuration
            4.1.3.1. XftConfig Structure
            4.1.3.2. XftConfig Syntax
            4.1.3.3. XftConfig Examples
           
           
        4.1.4. Afterword
       
       
    4.2. Redhat 7.x Differences
   
   
5. Adjusting Fonts in Specific Applications
    5.1. KDE
        5.1.1. Applying KDE Fonts and Colors to non-KDE Applications
       
       
    5.2. Netscape
   
   
6. Odds and Ends
    6.1. Notes
    6.2. Links
   
   

1. Introduction

One of the most annoying problems many of us are faced with is the poor
default fonts and font settings of X as implemented by many distributions.
I'm talking specifically about [http://www.xfree.org] XFree86, other versions
of X may be better. Many programs use fixed width default fonts when a
variable width font would be more appropriate. Other programs use fonts that
are so small as to be practically unreadable. The fonts that are bundled with
XFree86 are not of the same quality as found on some other platforms. XFree86
does come with a halfway decent courier font, but its Times and Helvetica
fonts are simple bitmap fonts that pixelize when they are scaled. This is
changing for the better recently, but a default Linux desktop still often
needs some tweaking to get the best fonts possible.  

This HOWTO attempts to show how to adjust various font settings, install new
fonts, and do other things that should greatly improve the appearance and
readability of fonts on the X Window Desktop. This is done by adjusting the
FontPath in the XF86Config file, by adding switches to X server command line
in startx or xdm (and variants), by adding new fonts, and by installing a
TrueType font server and fonts. TrueType does indeed make a huge difference.

Comments, corrections, additions and critiques are always welcome. You can
reach the author at <hal@foobox.net>. Contributions are also welcomed.
Especially anyone who really stays current with KDE and/or Gnome issues!  
-----------------------------------------------------------------------------

1.1. Conventions Used in this Document

*Where examples of commands are used, a "#" character is used to denote
    where typically the command would be run as the root user. A "$" is used
    where typically a non-root user would be executing the command.
   
*The examples use /usr/local/share/fonts/ttfonts as our TrueType font
    directory. There is no magic to this location, and could conceivably just
    as well be in any number of other locations. Some distros may have a
    default location for TrueType fonts, and you may want to use that
    instead.
   
*References to "xfs" are to the xfs as packaged by Redhat for versions 6.x
    and later. This differs significantly in some respects from the stock
    XFree86 xfs.
   
*References to "Netscape" are to the entire suite of programs from
    Netscape: Communicator, Navigator, Messenger, etc. And for all intents
    and purposes, font configuration in Mozilla is very similar.
   
*'XF86Config' is the X configuration file. For Redhat based distros, as of
    Redhat 7.0, this is now 'XF86Config-4' for XFree86 4.x. For the most
    part, we'll just use 'XF86Config' here.
   
    Also, while some aspects of XFree86 4.x configuration are the same as
    3.3.x, there are some significant differences. We'll only highlight the
    differences. So unless noted otherwise, any comments or examples will
    apply to both 3.3.x and 4.x versions.
   
*File system layout varies somewhat from distribution to distribution. It
    is impossible to stay on top of every conceivable variation of who keeps
    which files where. So take the examples here with a grain of salt if the
    PATHs don't seem to match your system.
   

-----------------------------------------------------------------------------
1.2. Change Log and What's New

 

*1.8: June 25, 2001: Included a new section on Anti-aliasing and Xft from
    Danny Tholen <obiwan@mailmij.org>. Many thanks on this not so well
    documented subject. Sebastiano Vigna's neat little package for
    downloading and installing MS webfonts, being the most noteworthy: [http:
    //freshmeat.net/webFonts4Linux] http://freshmeat.net/webFonts4Linux. A
    few other odds and ends.
   
*1.70: April 18, 2001: Added links for converting Mac TrueType Fonts
    (thanks to Karl A. Krueger), links to Unicode TrueType fonts (thanks to
    Tzafrir Cohen for suggestions and URLs), and added a section on
    anti-aliasing with X 4.0.2 (or greater). Also, included a reference to
    [http://www.kyz.uklinux.net/cabextract.php3] cabextract, a utility that
    is now available for extracting Win32 Fonts (among other things) from a
    Window's "cab" archive.
   
*1.60: March 21, 2001: A few very minor changes. Most notable news is
    anti-aliasing support now in XFree 4.02 (referenced in the Notes section
    only). Chinese translation URL added.
   
*1.55: Oct 11, 2000: Additional info on XFree86 4.x, especially Redhat's
    changes for RH7.0. A few other minor updates and additions. Also adding a
    neglected credit to Kristin Aanestad for his insight into much of what
    this document is all about.
   
*1.5: July 25, 2000: New sections added on fonts.alias, XFree86 4.x, and
    xfsft. Miscellaneous other changes and additions. Also, includes new
    Links and Notes sections, as well as a rewrite of the xfs sections.
    Various other changes and additions.
   
*0.1: Feb. 21, 1999: First release.
   

-----------------------------------------------------------------------------
1.3. New Versions

The pre-release versions of this document can be found at [http://
feenix.burgiss.net/ldp/fdu/index.html] http://feenix.burgiss.net/ldp/fdu/
index.html. 
-----------------------------------------------------------------------------

1.4. Copyright

Copyright  1999 by Doug Holland.

Unless otherwise stated, Linux HOWTO documents are copyrighted by their
respective authors. Linux HOWTO documents may be reproduced and distributed
in whole or in part, in any medium physical or electronic, as long as this
copyright notice is retained on all copies. Commercial redistribution is
allowed and encouraged; however, the author would like to be notified of any
such distributions.

All translations, derivative works, or aggregate works incorporating any
Linux HOWTO documents must be covered under this copyright notice. That is,
you may not produce a derivative work from a HOWTO and impose additional
restrictions on its distribution. Exceptions to these rules may be granted
under certain conditions; please contact the Linux HOWTO coordinator for more
information.

In short, we wish to promote dissemination of this information through as
many channels as possible. However, we do wish to retain copyright on the
HOWTO documents, and would very much like to be notified of any plans to
redistribute the HOWTOs, this one in particular! Web page authors are free to
link to this HOWTO without restriction, though the author would appreciate an
email informing him of this, just so he can boost his ego by knowing who else
reads and links to this document.

Many of the terms mentioned in this document are trade names. Unless
otherwise stated, all trademarks are property of their respective owners.
-----------------------------------------------------------------------------

1.5. Credits

CreatedbyDougHolland.
Email:[mailto:meldroc@frii.com] meldroc@frii.com
WWW:[http://www.frii.com/~meldroc/] http://www.frii.com/~meldroc/



UpdatedandmaintainedbyHalBurgiss.
Email:[mailto:hal@foobox.net] hal@foobox.net
WWW:[http://feenix.burgiss.net/ldp/fdu] http://feenix.burgiss.net/ldp/fdu/


Special thanks go to:

*The developers of the [http://www.xfree86.org] XFree86 Project, for all
    the hard work and time they have given. Also, Juliusz Chroboczek for his
    work with xfsft, and XFree86 4.x to help bring TrueType to the hungry
    masses. And Keith Packard for his anti-aliasing, and other work. This is
    not to slight the many, many other XFree86 volunteers.
   
*Font wizard Kristin Aanestad, whose legwork and insight on much of the
    xfs, TrueType, Netscape, and especially, the fonts.alias sections are
    much appreciated. More from Kristin at [http://home.c2i.net/dark/
    linux.html] Some Linux for Beginners on a wide range of topics.
   
*Danny Tholen <obiwan@mailmij.org> is responsible for the nice Xft
    section, and examples.
   
*The folks at [news:comp.os.linux.x] comp.os.linux.x who gave me a hand in
    figuring all of this out in the first place.
   
*The Linux community in general who made all of this possible in the first
    place. Especially those who have offered suggestions and comments that
    help to make this HOWTO a better resource.
   
*Microsoft and Apple: for providing the fonts that adorn my desktop.
   

 
-----------------------------------------------------------------------------

1.6. Translations

 Chinese: [http://www.linux.org.tw/CLDP/mini/FDU.html] http://
www.linux.org.tw/CLDP/mini/FDU.html by Yu-Chia Chang. 
-----------------------------------------------------------------------------

2. X Server Configuration

There are a few easy steps that can be taken that will help X do its job
better.
-----------------------------------------------------------------------------

2.1. Setting The FontPath

The first place to look for curing font problems is the XF86Config file. /usr
/X11/lib/X11/XF86Config or /etc/X11/XF86Config are the common locations.
(This may be XF86Config-4 for XFree86 4.x.) If you haven't guessed already,
the most important part of this file relating to fonts is the FontPath.
Before we get into that, this would be a good time to check the other parts
of your X configuration. Bad monitor settings can be even more of a headache
than bad fonts, so make sure your refresh rate is as high as your monitor can
handle (85 Hz is great, 75 Hz is OK, 60 Hz is painful.)  

Use your favorite text editor and edit XF86Config. Near the top of the file
in the "Files" section, you should see something vaguely like this:

   
    FontPath"/usr/X11R6/lib/X11/fonts/misc/"
    FontPath"/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath"/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath"/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath"/usr/X11R6/lib/X11/fonts/100dpi/"
    
   
This much should be the same, or at least similar, for both XFree86 3.x and
4.x. The FontPath tells X where to find the fonts it uses to render text on
your display. Order is important -- when an X application asks X to render
some text, the X server usually has some leeway to choose the font that is
used. The X server then goes through the FontPath and grabs the first font it
sees that matches the X client's criteria, and then displays. (Note that
Redhat's xfs for versions 6.x and later has a different way of setting the
FontPath. See the Section 3.2.2 below for more on xfs.) 

If the 100dpi fonts are not listed, they probably did not get installed for
whatever reason, so you may want install them now. Default installations may
put 75dpi fonts before the 100dpi fonts. If you have a high resolution
display (1024x768 or higher), this means very tiny fonts. If this is the
case, the first tweak you'll use is to switch the 75dpi and 100dpi FontPath
lines:

   
    FontPath"/usr/X11R6/lib/X11/fonts/misc/"
    FontPath"/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath"/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath"/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath"/usr/X11R6/lib/X11/fonts/75dpi/"
    
   
Next, specify that you prefer to use unscaled bitmap fonts. If you've ever
used Netscape or any other program that displays titles using big fonts,
you'll likely notice that those fonts are pixelized. This is ugly and needs
to be corrected. So add :unscaled to the ends of the misc, 100dpi and 75dpi
fonts. You can even use both unscaled and scaled fonts if you want, just put
the unscaled FontPath lines first to tell X you prefer unscaled fonts if
possible:

   
    FontPath"/usr/X11R6/lib/X11/fonts/misc:unscaled"
    FontPath"/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
    FontPath"/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
    FontPath"/usr/X11R6/lib/X11/fonts/Type1"
    FontPath"/usr/X11R6/lib/X11/fonts/Speedo"
    FontPath"/usr/X11R6/lib/X11/fonts/misc"
    FontPath"/usr/X11R6/lib/X11/fonts/100dpi"
    FontPath"/usr/X11R6/lib/X11/fonts/75dpi"
    
   
After making these changes, restart X. Doesn't the desktop look better
already?
-----------------------------------------------------------------------------

2.2. X Server Command Line Options

The next thing you need to do is adjust the command line options for the X
server. You'll want to use the -dpi switch which specifies the display
resolution in dots per inch. As a lot of systems use high resolution displays
these days, chances are they'll be working at 100 dpi.

If you start X from the console command prompt, type:

$ startx -dpi 100 -depth 16

Or these options can be stored in ~/.xserverrc. See the startx and xinit man
pages for more on this.

If you use xdm (or friends such as gdm) for graphical logins, you'll want to
edit your /usr/X11/lib/X11/xdm/Xservers file (or possibly /etc/X11/xdm/
Xservers) which will have the command line for the Xserver in it. Mine has
the line:

:0 local /usr/X11R6/bin/X -dpi 100 -gamma 1.6

Note that there is no magic to "-dpi 100". Choose something higher if your
hardware will support it -- like "-dpi 120".

More information is in the X, Xserver, xdm, xinit, and startx man pages.
-----------------------------------------------------------------------------

3. TrueType Fonts (One of the few things Windows is good for)

Because the boys at Redmond are very concerned with the appearance of their
software (as opposed to the internal workings ;) they built TrueType font
support into Windows. And of course no big surprise, but they got the idea
from Apple. In fact, TrueType is a registered trademark of Apple Computer,
Inc. Windows 9x and nearly every other incarnation of Windows comes with
Arial, Times New Roman, and Courier New, which are roughly equivalent to
Helvetica, Times and Courier. TrueType fonts are scalable, so they look good
in large sizes, and they are well hinted, so they are readable at small
sizes. Many windows applications come with dozens more TrueType fonts. Don't
microwave your Windows CD yet, you'll want to get those fonts first!

Unfortunately, XFree86 3.x does not come with built in TrueType support, so
you'll have to add it yourself (see below). This will mean installing a font
server that does support TrueType and, of course, installing the fonts
themselves. XFree86 4.x does have built in support however (see Section 4).
You won't find many decent TrueType fonts included with any distribution. The
likely reason is that there are not many quality TrueType fonts available
under a suitable license at this time.  
-----------------------------------------------------------------------------

3.1. Making TrueType Fonts Available

Let's start with the fonts first. Any TrueType font included with the various
MS Windows incarnations should work. Don't forget word processors and other
apps that may include their own fonts. MacOS fonts will only work if
converted to a usable format. (See the links section for converter packages.)
There are also some 'free' TrueType fonts available for download if you have
already nuked that CD (see links section).

In order to use TrueType, the fonts will have to be always accessible to the
font server. This means they will have to be on a filesystem that is always
mounted. This can conceivably be a Windows partition on a dual boot system.
Alternately, the fonts can be copied to Linux. First su to root:

#su-
#mkdir-p/usr/local/share/fonts/ttfonts


Now, change to the new font directory:

#cd/usr/local/share/fonts/ttfonts


Then, add the fonts to this directory, either by copying them from your
Windows system:

#cp/mnt/<path_to_fonts>/*ttf.


or by downloading those available directly from Microsoft: [http://
www.microsoft.com/typography/fontpack/default.htm] http://www.microsoft.com/
typography/fontpack/default.htm. These fonts are in self-extracting zip
archives. The ones labeled for use with Windows 3.1 can indeed be unpacked
under Linux with the Linux zip utility:

#ls*exe|xargs-n1unzip-L


The '-L' option will convert to lower case font names (this may be necessary
for some versions of xfsft and Redhat's xfs). Note that the current Linux zip
utility does not work with the 32 bit Win9x cab font archives. (It also looks
like Microsoft no longer has the 16 bit Arial, Courier and Times-Roman on
this site.) But these can be unarchived under Linux with cabextract, which
can be found [http://www.kyz.uklinux.net/cabextract.php3] http://
www.kyz.uklinux.net/cabextract.php3. This would now seem to be the best way
to go since there is a better selection of fonts.

A slick solution to this from Sebastiano Vigna is his [ http://freshmeat.net/
webFonts4Linux ] http://freshmeat.net/webFonts4Linux, which automates the
downloading, extracting and installation of the Microsoft fonts all in one
neat package.

Or you can get an RPM of WebFonts that contains some of the MS 'Web'
TrueTypes from [ftp://ftp.rpmfind.net/linux/contrib/noarch/noarch/
webfonts-1-3.noarch.rpm] ftp://ftp.rpmfind.net/linux/contrib/noarch/noarch/
webfonts-1-3.noarch.rpm. This has enough basic fonts to keep Netscape and
other web browsers happy. Something similar for Debian is [http://
packages.debian.org/unstable/graphics/msttcorefonts.html] http://
packages.debian.org/unstable/graphics/msttcorefonts.html. This does not
include the actual fonts, but facilitates the installation.

You will also have to include the new TrueType directory(s) in the X server's
fontpath. So with your text editor of choice add the line(s) as appropriate:

   
    FontPath"/usr/local/share/fonts/ttfonts"
    FontPath"/usr/X11R6/lib/X11/fonts/misc:unscaled"
    FontPath"/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
    FontPath"/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
    FontPath"/usr/X11R6/lib/X11/fonts/Type1"
    FontPath"/usr/X11R6/lib/X11/fonts/Speedo"
    FontPath"/usr/X11R6/lib/X11/fonts/misc"
    FontPath"/usr/X11R6/lib/X11/fonts/100dpi"
    FontPath"/usr/X11R6/lib/X11/fonts/75dpi"
    
   
-----------------------------------------------------------------------------
3.2. Font Servers

There are several font servers available that will do the job: xfstt, xfsft,
and Redhat's patched version of xfs based on xfsft. While these names are all
too similar, these are different packages. One, or more, of these should be
included with any recent Linux distribution, and you may have one installed
already.  

Historically, font servers were used to serve fonts over a network. Font
resources could then reside on one host, and clients could access them as
needed. But, the developers have enhanced these to include features such as
the ability to render TrueType fonts. (XFree86 4.x has this ability included
already, and thus an additional font server is not really needed solely for
the purpose of having TrueType support.) 
-----------------------------------------------------------------------------

3.2.1. xfstt

One such font server is xfstt. xfstt was designed specifically with TrueType
fonts in mind.
-----------------------------------------------------------------------------

3.2.1.1. Installation

xfstt is very easy to install and configure. If it isn't already installed,
you'll want to download the tarball, or check your CD. The most current
version can be found at [http://metalab.unc.edu/pub/Linux/X11/fonts/] http://
metalab.unc.edu/pub/Linux/X11/fonts/ 

Once you have the tarball, unpack it:

$tar-zxvfxfstt-*tgz


Then build and install it. Read the INSTALL file for quick instructions, but
it's a no brainer.  

From the xfstt directory is all you have to do.

#make
#makeinstall


Then start xfstt with:

#xfstt--sync#updatesxfstt'sfontdatabase
#xfstt&#runsxfsttinthebackground.


xfstt should be started before the X server starts. Once you have this
working correctly, you can add the above lines to /etc/rc.d/rc.local, or
other suitable start up file. Then type:

$xset+fpunix/:7101#
tellsXaboutxfstt,andwheretolookforfonts.


or add:

   
    FontPath "unix/:7101"
   
to your XF86Config to tell X about the font server. Rerun xfstt --sync any
time the FontPath, or contents, change.
-----------------------------------------------------------------------------

3.2.1.2. Adjusting the Default Font Size

If your TrueType fonts appear to be very tiny, the following commands may
help.

Add the -dpi switch to your X server command line (see section 3 above to do
this.)

Use the --res switch to tell xfstt to increase the default resolution. Use
the following command line.

#xfstt--res120

-----------------------------------------------------------------------------

3.2.2. Redhat's xfs

As of Redhat Linux 6.0, Redhat based distributions (Mandrake, etc) have
included a specially patched version of xfs, the XFree86 Font Server, and
patched X servers as well. Redhat's xfs includes the xfsft patch set which in
turn is built upon the FreeType Font library. Redhat's xfs provides similar
functionality to xfstt. xfs is able to serve both TrueType and Type 1 fonts,
as well as legacy X fonts.

If you are using a Redhat based distro, you should have xfs installed
already. If not, it is in the XFree86-xfs*rpm. To make sure it runs as one of
the default services, either use ntsysv or:

# chkconfig --add xfs

Now xfs will start every time you boot.
-----------------------------------------------------------------------------

3.2.2.1. Setting the xfs FontPath

The default Redhat installation of xfs serves fonts via a Unix Domain Socket.
We'll need to tell the X server where to look for xfs, and thus fonts. The
FontPath in /etc/X11/XF86Config must include for Redhat 6.x:

   
    FontPath"unix/:-1"
    
   
This is changed for Redhat 7.x to:

   
    FontPath"unix/:7100"
    
   
At least for a default configurations. This is a reference to the socket
where xfs is listening. You may include additional FontPaths, but these will
be handled by the X server, and not xfs. A clean install of Redhat 6/7 should
have this already set up, but if you are upgrading from an older version, you
may have to change this yourself!  

xfs then has its own, separate FontPath stored in /etc/X11/fs/config. This is
where it will look to find fonts. This is over and above the X server's
FontPath in XF86Config. You can either add the new path(s) with a text
editor, or use the chkfontpath command:  

# chkfontpath --add /new/font/path

The FontPath must exist before running chkfontpath. The relevant section of /
etc/X11/fs/config should now look something like this:

   
   
    catalogue=/usr/X11R6/lib/X11/fonts/misc:unscaled,
    /usr/X11R6/lib/X11/fonts/100dpi:unscaled,
    /usr/X11R6/lib/X11/fonts/75dpi:unscaled,
    /usr/X11R6/lib/X11/fonts/Type1,
    /usr/X11R6/lib/X11/fonts/Speedo,
    /usr/X11R6/lib/X11/fonts/misc,
    /usr/X11R6/lib/X11/fonts/100dpi,
    /usr/X11R6/lib/X11/fonts/75dpi,
    /new/font/path
   
    
   
When adding a new FontPath for TrueType fonts, you will want to do this step
after installing and preparing the fonts. See the next section.
-----------------------------------------------------------------------------

3.2.2.2. Getting the Fonts Ready

We still have a bit of work to do before we can actually use any TrueType
fonts. xfs requires a few things to be in order. First, all font files must
have lower case names for xfs. Secondly, they shouldn't have embedded spaces.
And then, we will need to create a couple of files to make things go.

Su to root, and change to the directory where the TrueType fonts are.

#su-
#cd/usr/local/share/fonts/ttfonts


If there are any upper case font names, you can use the following script to
convert all names to lower case:



#!/bin/sh
#
##--------convertuppertolowercase---------

ls*|whilereadf
do
if[-f$f];then
if["$f"!="`echo\"$f\"|trA-Za-z`"];then
#Notethat'This'willoverwrite'this'!
mv-iv"$f""`echo\"$f\"|trA-Za-z`"
fi
fi
done

##eof



Note the punctuation -- the backquotes are important! Remove any spaces from
font names too. Once the TrueType fonts are properly installed, you must
create both fonts.dir and fonts.scale files. The following commands do this:

#ttmkfdir-ofonts.scale
#mkfontdir


You should now have fonts.dir and fonts.scale files in your TrueType font
directory. ttmkfdir is in the Freetype RPM, and must be run before mkfontdir.
With Debian based distros, there is a similar utility called mkttfdir, and is
in the fttools Deb package. Though this apparently does not generate as many
encodings as ttmkfdir. These commands may not always report errors, so verify
that they were created and are not empty files: 

$ls-lfonts.*
-rw-r--r--1rootroot11657Aug1710:31fonts.dir
-rw-r--r--1rootroot11657Aug1710:31fonts.scale


If you encounter any problems, try ttmkfdir with the - m switch. This will
discard bad characters from the font file. Specify a number such as 50 or l00
(ttmkfdir -m 50). The files themselves are text files. Have a look: 


$lessfonts.dir
114
webdings.ttf-microsoft-Webdings-medium-r-normal--0-0-0-0-p-0-microsoft-symbol
verdanaz.ttf-microsoft-Verdana-bold-i-normal--0-0-0-0-p-0-ascii-0
verdanaz.ttf-microsoft-Verdana-bold-i-normal--0-0-0-0-p-0-fcd8859-15
verdanaz.ttf-microsoft-Verdana-bold-i-normal--0-0-0-0-p-0-iso8859-15
verdanaz.ttf-microsoft-Verdana-bold-i-normal--0-0-0-0-p-0-iso8859-9
verdanaz.ttf-microsoft-Verdana-bold-i-normal--0-0-0-0-p-0-iso8859-1
[...]


Next, update the FontPath and xfs:

#chkfontpath--add/usr/local/share/fonts/ttfonts
#/etc/rc.d/init.d/xfsrestart


You should now be in business. You can check which fonts are available to X:

$ xlsfonts | less

or check them out further with xfontsel, or gfontsel. If they are visible to 
xlsfonts, then they are available to X and vice versa. If they are not there,
try restarting X with Ctrl-Alt-BS.
-----------------------------------------------------------------------------

3.3. xfsft

[http://www.dcs.ed.ac.uk/home/jec/programs/xfsft/] xfsft is a TrueType
solution from Juliusz Chroboczek. xfsft is based on the FreeType font library
as developed by Mark Leisher and others. It is essentially is a patch for
XFree86's xfs and related libraries -- xfs + ft. Redhat's xfs is essentially
xfsft with a few minor modifications. Also, XFree86 4.x includes the freetype
font module which is also the result of Juliusz's work, and is one of the
TrueType solutions available for XFree86 4.x. 

Building xfsft requires having at least some of the XFree86 source available,
in addition to xfsft itself, so this is not for the faint of heart.
Instructions for building and configuring xfsft are in the tarball, so I
won't go into details here. They are pretty straight forward. There are links
to binaries available at the xfsft home page (see above).

Note that you must also create fonts.scale and fonts.dir files for xfsft.
fonts.scale can be created manually (ugh!), or with the ttmkfdir utility.
This is not included with xfsft but you can get it here: [http://
www.joerg-pommnitz.de/TrueType/ttmkfdir.tar.gz] http://www.joerg-pommnitz.de/
TrueType/ttmkfdir.tar.gz, or probably on many Linux archives sites too.
Redhat has this as part of the Freetype RPM. And for Debian it is called 
mkttfdir and is in the fttools package.  

You will also need a configuration file. Here is a sample: 

   
    -----------------------------------------------------
   
    clone-self=off
    use-syslog=off
   
    client-limit=20
   
    catalogue=/usr/local/share/font/ttfonts
   
    error-file=/home/jec/fonts/xfs.errors
   
    #indecipoints
    default-point-size=120
   
    #x,y
    default-resolutions=100,100,75,75
   
    -----------------------------------------------------
   
    
   
You can then run start xfsft: 

# xfs -port 7100 -config /path/to/your/config/file &

You can then add xfsft to the X server's FontPath: 

$ xset +fp tcp/localhost:7100

If all goes well, you could then add this FontPath to XF86Config.
-----------------------------------------------------------------------------

3.4. The fonts.alias File

fonts.alias is yet another font configuration file that can be used to tweak
how fonts are handled. Like fonts.scale and fonts.dir, fonts.alias must be in
the same directory as the fonts you are aliasing. It is not mandatory
however, but does solve certain potential problems.Here is an example from
the first line of/usr/X11R6/lib/X11/fonts/misc/fonts.alias on a Redhat
system:

fixed-misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-iso8859-1


fixed is the 'alias' here. Any time this is requested, we actually get the
font definition from the second column. Font too small? Just change the
definition. (Warning: this is a critical file, at least on Redhat.) The same
principle applies to all fonts, including TrueType. In fact, if you don't
have TrueType, you could conceivably use this trick to have a comparable Type
1, or other, font aliased as a TrueType.

fonts.alias is important for some applications that don't handle the data
provided by fonts.scale well. Most notably here is Netscape. Without a
fonts.alias you will find that Netscape will only show point sizes of 0 and
12 available. fonts.alias fixes this. You might also find that if you a
specify another size with the scalable font option under Preferences,
Netscape will not remember this setting. Annoying! This is also fixed. So we
really need this file. Sample excerpt from a fonts.scale: 


arial.ttf-monotype-Arial-medium-r-normal--0-0-0-0-p-0-ascii-0
arial.ttf-monotype-Arial-medium-r-normal--0-0-0-0-p-0-fcd8859-15
arial.ttf-monotype-Arial-medium-r-normal--0-0-0-0-p-0-iso8859-15
arial.ttf-monotype-Arial-medium-r-normal--0-0-0-0-p-0-iso8859-1


These are scalable so we don't get any predefined point sizes. We will need
to create our fonts.alias something like this excerpt for Arial:


-monotype-Arial-medium-r-normal--6-60-0-0-p-0-iso8859-1\
-monotype-Arial-medium-r-normal--9-90-75-75-p-0-iso8859-1

-monotype-Arial-medium-r-normal--7-70-0-0-p-0-iso8859-1\
-monotype-Arial-medium-r-normal--9-90-75-75-p-0-iso8859-1

-monotype-Arial-medium-r-normal--8-80-0-0-p-0-iso8859-1\
-monotype-Arial-medium-r-normal--10-100-75-75-p-0-iso8859-1

-monotype-Arial-medium-r-normal--9-90-0-0-p-0-iso8859-1\
-monotype-Arial-medium-r-normal--11-110-75-75-p-0-iso8859-1

-monotype-Arial-medium-r-normal--10-100-0-0-p-0-iso8859-1\
-monotype-Arial-medium-r-normal--12-120-75-75-p-0-iso8859-1

-monotype-Arial-medium-r-normal--11-110-0-0-p-0-iso8859-1\
-monotype-Arial-medium-r-normal--12-120-75-75-p-0-iso8859-1

-monotype-Arial-medium-r-normal--12-120-0-0-p-0-iso8859-1\
-monotype-Arial-medium-r-normal--12-120-75-75-p-0-iso8859-1

-monotype-Arial-medium-r-normal--13-130-0-0-p-0-iso8859-1\
-monotype-Arial-medium-r-normal--13-130-75-75-p-0-iso8859-1

-monotype-Arial-medium-r-normal--14-140-0-0-p-0-iso8859-1\
-monotype-Arial-medium-r-normal--14-140-75-75-p-0-iso8859-1

-monotype-Arial-medium-r-normal--15-150-0-0-p-0-iso8859-1\
-monotype-Arial-medium-r-normal--15-150-75-75-p-0-iso8859-1

-monotype-Arial-medium-r-normal--18-180-0-0-p-0-iso8859-1\
-monotype-Arial-medium-r-normal--18-180-75-75-p-0-iso8859-1

-monotype-Arial-medium-r-normal--24-240-0-0-p-0-iso8859-1\
-monotype-Arial-medium-r-normal--24-240-75-75-p-0-iso8859-1



(Please note that I have split each line for readability. There should be two
columns all on one line, without the "\", and separated by at least one
space.) This will keep Netscape happy. Also, if font names should have
embedded spaces, then you should enclose the filename in quotes. You might
also note the pointsize discrepancy between the first and second columns of
the first few rows. The first column of the first entry has a '6', whereas
this is aliased to a '9' in the second column, and thus '9' point. This is by
design and is an excellent way to overcome the Netscape 'damn tiny fonts'
syndrome. Adjust to suit your tastes, resolution, and eyesight.  

This file can be created manually with a text editor, or conceivably with
some fancy sed or awk scripting. There is an excellent discussion of this
file, and other font related topics at Kristin Aanestad's site at [http://
home.c2i.net/dark/linux.html#ttf] http://home.c2i.net/dark/linux.html. There
is also a link to a python script which can reportedly automatically generate
a fonts.alias file at this same site. Thanks to Kristin whose work and
insight was the inspiration for this section! 

Note that with XFree86 4.0.2 and greater, there are new font handling
mechanisms available via the Xft extensions. Font aliasing is done in Xft's
own configuration file: XftConfig. This is the preferred method where
anti-aliasing, and the other new rendering features are desired. See the 
Anti-aliasing Section for more on this. This is only true where the
application itself supports the new extensions! At this time, not many do
yet.
-----------------------------------------------------------------------------

4. XFree86 4.x

[http://www.xfree86.org/4.0/] XFree86 4.0 introduced native support for
TrueType fonts, along with other new features. The enhanced font support is
based on xfsft from Juliusz Chroboczek, which in turn is based on the
FreeType font library originally from Mark Leisher, so the configuration is
similar to xfsft and Redhat's patched xfs. As of 4.0.2, XFree86 begins to
support anti-aliasing which is a technique for smoothing font outlines (see
section below). 

The FontPath is still in XF86Config, as always. For Redhat 6/7 using a stock
XFree86 4.x (i.e. NOT the Redhat 7.x supplied version), this will mean moving
the Redhat xfs FontPath from /etc/X11/fs/config back to XF86Config. A
separate font server is no longer needed just for TrueType support. You may
disable it, unless it is needed to serve fonts to other clients in a network
environment. See the section below for Redhat 7.x specific configuration
issues. 

   
    Section"Files"
    FontPath"/usr/X11R6/lib/X11/fonts/misc:unscaled"
    FontPath"/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
    FontPath"/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
    FontPath"/usr/X11R6/lib/X11/fonts/misc"
    FontPath"/usr/X11R6/lib/X11/fonts/Type1"
    FontPath"/usr/X11R6/lib/X11/fonts/Speedo"
    FontPath"/usr/share/fonts/default/Type1"
    FontPath"/usr/local/share/fonts/ttfonts"
    FontPath"/usr/X11R6/lib/X11/fonts/100dpi"
    FontPath"/usr/X11R6/lib/X11/fonts/75dpi"
    EndSection
    
   
In order to use TrueType, you must also specify which font module the X
server should be using in the "Module" section:

   
    Section"Module"
    Load"freetype"
    Load"speedo"
    Load"type1"
    <loadothermodules....>
    EndSection
    
   
Note that there can be only one 'Module' section, so include any other
modules here as well.

You also must to create fonts.scale and fonts.dir file for each TrueType font
directory, just like for xfsft and Redhat's xfs. [http://
www.joerg-pommnitz.de/TrueType/ttmkfdir.tar.gz] ttmkfdir will come in handy
for fonts.scale. See the xfs Section 3.2.2 above for more details and
examples. 

xtt is another available TrueType module that is best known for supporting
ideographic (Oriental) type fonts. You can use either, but only one at a
time.

X server command line options are still the same as previous versions of X:

$ startx -dpi 100
-----------------------------------------------------------------------------

4.1. Anti-aliasing

Anti-aliasing is a technique for producing even smoother, crisper looking
fonts by subtly softening the sharp, jagged edges. This has long been a
feature of Apple and Microsoft font rendering, and is now making it's way
into X via the X Rendering Extension specification thanks to Keith Packard.
The new extensions provide other benefits as well. This is still a bit
experimental at this time (June 2001). Distributions that support
anti-aliasing with their stable/official versions are now being released.

That is the good news. The bad news is that not all drivers support
anti-aliasing yet. This is a moving target, so you will have to dig around to
find whether your chipset is supported or not. The recently released 4.1
should have near universal support. More not-so-good news is that few
applications are actually taking advantage of this yet. We will have to wait
for the various toolkits (TK, GTK, etc) to catch up.

If you are reading this long after the publication date (June 2001),
hopefully most of these shortcomings will have been overcome. All hardware
will eventually be supported, mainstream distros will have shipped releases
that include the new extensions, and they will be enabled by default. Many
apps will look better since they will be "AA" aware, and we won't have to
jump through any configuration hoops just to make it work. In the meantime,
read on ... 
-----------------------------------------------------------------------------

4.1.1. Requirements

Minimum requirements for Anti-Aliasing:

*XFree86 4.0.2 or later.
   
*You graphic card's driver has to support anti-aliasing. If 4.0.2 (or
    greater) is already installed, you can get this information direct from
    the driver with xdpyinfo. Run this and look for "Number of Extensions:".
    If this lists "RENDER" among them, then you should be good to go. If not,
    well, it isn't going to work, and you will have to wait for an updated
    driver.
   
*The Freetype2 library available from [http://www.freetype.org] http://
    www.freetype.org, and also now bundled with XFree86. XFree needs to be
    linked against this, so install and build first if building from scratch.
    Your distro should have Freetype packages as well. Just make sure it is
    freetype-2.
   
*TrueType fonts are best for display purposes. Type1 is also good. See
    above sections.
   
*For KDE users, KDE supports anti-aliasing as of 2.x. This will require
    QT-2.3.0 or later, and built with Xft support. A nice font HOWTO from
    Troll Tech for KDE and QT can be found: [http://trolls.troll.no/~lars/
    fonts/qt-fonts-HOWTO.html] http://trolls.troll.no/~lars/fonts/
    qt-fonts-HOWTO.html.
   
    Gnome does not support anti-aliasing at this time (as of 1.4). Awaiting
    GTK implementation (probably for GTK 2.0). Apparently this will be
    available later this year, so stay tuned.
   
*Applications that "know" about anti-aliasing. Not necessarily at the
    individual application level, but the libraries and toolkits (GTK, TK,
    etc.) that the application are built against, must be able to use the new
    features. At this time, there are scant few. KDE/QT is first out of the
    box. Also, xterm supports the new extensions.
   
*The new rendering extensions configuration file, XftConfig, must be
    configured for the fonts you want to use.
   
*The new extensions supplant much of what we have been doing with font
    servers like xfs. fonts.alias and similar configuration files, for
    instance, are not used for fonts that are being controlled by the new
    extensions.
   

-----------------------------------------------------------------------------
4.1.2. Installation

Keith Packard has brief summary of the steps required for building,
installing and configuring from source at [http://www.xfree86.org/~keithp/
render/aafont.txt] http://www.xfree86.org/~keithp/render/aafont.txt. No need
to reprint it here.

Newer distro releases are likely to have the foundation support for
anti-aliasing available now. Redhat, for instance, has it available as of
Redhat 7.1. Or look for the pre-release/unstable packages from your distro.
This would be a good approach to take at this time if you want to be on the
cutting edge, and may be more palatable for some than building each package
from source.

To verify the necessary components, first make sure the "freetype" module
(and any others) are loaded. Check the X server output:


(II)LoadModule:"freetype"
(II)Loading/usr/X11R6/lib/modules/fonts/libfreetype.a
(II)Modulefreetype:vendor="TheXFree86Project"
compiledfor4.0.3,moduleversion=1.1.9
Moduleclass:XFree86FontRenderer
ABIclass:XFree86FontRenderer,version0.2
(II)LoadingfontFreeType
 

Then verify if the "RENDER" extension is available, either check with 
xdpyinfo, or check the X server log, typically /var/log/XFree86.0.log:


(II)Initializingbuilt-inextensionMIT-SHM
(II)Initializingbuilt-inextensionXInputExtension
(II)Initializingbuilt-inextensionXTEST
(II)Initializingbuilt-inextensionXKEYBOARD
(II)Initializingbuilt-inextensionLBX
(II)Initializingbuilt-inextensionXC-APPGROUP
(II)Initializingbuilt-inextensionSECURITY
(II)Initializingbuilt-inextensionXINERAMA
(II)Initializingbuilt-inextensionXFree86-Bigfont
(II)Initializingbuilt-inextensionRENDER
 

If "RENDER" is there, anti-aliasing and the other advanced rendering
extensions should be enabled.
-----------------------------------------------------------------------------

4.1.3. Xft Configuration

By Danny Tholen <obiwan@mailmij.org>

Xft is an interface to the freetype rasterizer written by Keith Packard,
member of the XFree86 Project, Inc. It allows applications to use fonts from
the new X render extension using a unified font naming scheme. In /etc/X11/
XftConfig (or /usr/X11R6/lib/X11/XftConfig) you will find a configuration
file which can be adapted to suit your personal taste. In this section I will
explain the syntax and demonstrate some things you can do with this file.

The following information is based on 4.0.3. 4.1 is just released, and there
may be a few new wrinkles not touched on here.
-----------------------------------------------------------------------------

4.1.3.1. XftConfig Structure

The basic structure revolves around a 'pattern'. A pattern is a set of name/
valuelist pairs, each valuelist contains one or more typed values. A certain
application requests a font, for example:

family:"Arial"
size:12
encoding:"iso8859-1"


A size 12 arial font in latin-1 encoding. The Xft extension will now try to
patch this pattern to all of the fonts available in the system. And selecting
the one with the best score. Before the matching is done Xft looks in
XftConfig. The requested pattern can here be extended before use. An example
is:

matchanyfamily=="Arial"editantialias=true;


This will enable anti-aliasing for all fonts of the family Arial.

Also, the X server is queried to list all of its fonts; the XLFD contains
just enough information to match fonts roughly.

Here's a list of attributes used in matching fonts (in priority order, this
may not be up to date anymore!):

foundryfontfoundry(string,like"monotype")
encodingfontencoding(string,like"iso8859-1")
spacingfontspacing(integersorproportional(0),mono(100),
charcell(110))
boldisthefontbold?(boolean)
italicisthefontitalic?(boolean)
antialiasisthefontantialiased?(boolean)
familyfontfamily(string)
sizefontsize(double)
stylefontstyle(string,like"BoldItalic")
slantfontslant(roman,italic,oblique)
weightfontweight(integersorlight,medium(100),demi-bold,
bold,black)
rasterizernotyetused(probably"TrueType","Type1",...)
outlineareoutlinesavailable?(boolean)

-----------------------------------------------------------------------------

4.1.3.2. XftConfig Syntax

*dir
   
    Adds a directory to the list of places Xft will look for fonts. There is
    no particular order implied by the list; Xft treats all fonts about the
    same.
   
*include and includeif
   
    Cause Xft to load more configuration parameters from the indicated file.
    "includeif" doesn't elicit a complaint if the file doesn't exist. If the
    file name begins with a "~" character, it refers to a path relative to
    the home directory of the user. This is useful for user-specific
    configurations.
   
*match edit
   
    If a pattern from an application matches the pattern after "match", it is
    edited with the instructions in edit. The pattern match is done as
    follows:
   
    matchqual FIELD-NAME COMPARE CONSTANT
    
   
    where qual is either any (matches one specific font) or all (matches all
    fonts). An example:
   
    matchallfoundry==monotype
    
   
    which will match (and edit) all fonts belonging to the foundry "monotype"
    .
   
    matchanyfamily==arial
    
   
    will match (and edit) one specific font with the family name "arial".
   
    FIELD-NAME is any one of the properties found in the above section 
    Structure, or additionally:
   
    pixelsizefontsizeinpixels(integer)
    charspacecharacterspace(integer)
    minspaceminimalspacing(integer)
    rgbacolorhinting(stringrgborbgrand
    verticalhintingvrgbvbgr)
    xlfdxserverfont(string,typexlsfontsto
    seealistofyourxlfdstrings)
    filethefontfile(string)
    coreuseXcorefonts?(boolean)
    renderuserenderfonts?(boolean)
    indexIhavenoideawhatthisdoes:)
    scalableisthefontscalable(boolean)
    scalescalethefont(integer)
    charwidthcharacterwidth(integer)
    charheightcharacterheight(integer)
    matrixnoidea(notreallyatleast)
    
   
    COMPARE can be <, >, or ==.
   
    CONSTANT is the value of the field-name in the appropriate type (see
    above section Structure).
   
    You can use multiple matches before you use the "edit" statement:
   
    editFIELD-NAME ASSIGN EXPR SEMI
    
   
    Where ASSIGN can be one of =, += or =+. With =, the matching value in the
    pattern will be replaced by the given expression. += or =+ will prepend/
    append a new value to the list of values for the indicated field.
   
    EXPR sets the FIELD-NAME to a value.
   
    SEMI is a semicolon (;). You can use multiple instructions, separated by
    a semicolon. See below for examples if this is confusing.
   

-----------------------------------------------------------------------------
4.1.3.3. XftConfig Examples

And now Ill try to list a few useful configurations and explain them. Note
that it is configured for my system, and I may use different fonts than you,
so try to adapt the examples to your own needs.

 1. How do I make fonts available to Xft?
   
    List your Type 1 and TrueType font directories with "dir". On my system
    (Mandrake 7.2) this becomes:
   
    dir"/usr/X11R6/lib/X11/fonts/Type1"
    dir"/usr/X11R6/lib/X11/fonts/drakfont"
    
   
 2. How do I use a user specific XftConfig file?
   
    Put an .xftconfig file in your user directory and add:
   
    includeif"~/.xftconfig"
    
   
    to your standard XftConfig. This will enable a user specific
    configuration file, but it will not complain if there is no such file.
   
 3. How do I make aliases for my fonts?
   
    I noted that my KDE console asks for "mono" fonts when it is looking for
    a fixed font. "console" is used when I select "linux" in the font menu of
    the KDE konsole. Therefore, I used two aliases for fonts which are also
    named "fixed":
   
    matchanyfamily=="fixed"editfamily=+"mono";
    matchanyfamily=="console"editfamily=+"mono";
    
   
 4. Anti-aliasing my fonts makes me dizzy!
   
    Although there is a big fuzz around AA in X, good fonts actually look
    better if they are not anti-aliased. The anti-aliasing blurs the fonts by
    adding gray pixels to the edges, and this may strain your eyes if you
    looking at them for a long time. (Your eyes will try to get the fonts
    sharper, which of course is not working because they are blurred;)
    However, for very small fonts, anti-aliasing may increase the readability
    of the fonts, because with sharp edges, there are to little pixels
    available for your mind to figure out what it means. And for bigger
    fonts, the edges become very jagged when not anti-aliased, so here you
    also might want to have aliased fonts. Of course you can also turn off
    the anti-aliasing for specific fonts. In other operating systems, most
    truetype fonts are not anti-aliased between 8 and 12 pixels, while only
    large Type1 fonts are anti-aliased.
   
    Use the following in your XftConfig to anti-alias only fonts of specific
    sizes:
   
    match
    anysize>8
    anysize<15
    edit
    antialias=false;
    
   
 5. My fixed fonts do not appear or look _very_ wrong in the KDE konsole or
    similar programs!
   
    I noted that somehow a lot of fixed font do not tell Xft that they are
    fixed, and thus, mono spaced. Therefore only a part of the font is
    displayed. We can manually set the spacing for these fonts (this assumes
    you have fixed aliased with mono as in question 3 above:
   
    match
    anyfamily=="mono"
    edit
    spacing=mono;
    
   
 6. My Symbol, Webdings, etc. fonts do not show up!
   
    For some reason some (symbol) fonts are not correctly recognized, and Xft
    will show your default font, or a font which has the closest match (which
    is generally not what you mean at all). For Adobe Symbol and MS-webdings
    I did the following to get them working:
   
    match
    anyfamily=="webdings"
    edit
    antialias=false;
    encoding+="glyphs-fontspecific";
   
   
    match
    anyfamily=="symbol"
    edit
    antialias=false;
    encoding+="glyphs-fontspecific";
    
   
    A useful way of figuring out these things is to activate debugging with:
   
    exportXFT_DEBUG=1024
    
   
    This will generate a lot of output, especially if you have many fonts,
    because it lists the properties and scores of every font available. You
    can also use other values. For a nice summary of what happens (requested
    font, XftConfig substitutions, x server additions and the finally matched
    font), you can use XFT_DEBUG=2.
   
 7. Why do my KDE programs start now soooo slooow?
   
    The Xft mechanism in XFree prior to 4.1 had to parse the XftConfig file
    each time a program was started. And the info of all these fonts had to
    be re-read. As of X 4.1.0, a cache is used and starting applications
    using Xft is much faster. Especially if you have many fonts this can be
    very useful. So, upgrading XFree86, and related packages, is a good idea.
   
 8. I have a LCD screen, can I use subpixel hinting instead of normal
    anti-aliasing?
   
    Yes you can. Subpixel hinting uses colors instead of gray pixels to do
    the AA. I do not have a LCD screen so I do not have any idea of how it
    looks but you can play with the rgba setting. Try:
   
    matcheditrgba=bgr;
    
   
    or use rgb if you have a different type of monitor. For vertical AA you
    can try vbgr and vbgr.
   
 9. My fonts still look bad!
   
    If you do not have some good truetype fonts, it is worth to go and look
    for them on the Internet. Other reasons why your fonts still look bad can
    be because of your build of freetype2. Snapshots versions before 2.0.2
    were compiled with an option that had some patent issues. Therefore, the
    standard 2.0.2 and 2.0.3 compiles without this option. To fix this,
    download the freetype2 source rpm and change in include/freetype/config/
    ftoption.h line 314:
   
    #undefTT_CONFIG_OPTION_BYTECODE_INTERPRETER
    
   
    to:
   
    #defineTT_CONFIG_OPTION_BYTECODE_INTERPRETER
    
   
    and rebuild with this modified source. See the freetype2 README file for
    details. Adobe Courier looks terrible on my system, so I made an alias so
    that Lucida console is displayed instead. If anyone can get it to display
    nicely I would appreciate it.
   

This is my XftConfig:

#
#XftConfig
#
#By:DannyTholen
#
#UsewithType1andTrueTypefonts
#

dir"/usr/X11R6/lib/X11/fonts/Type1"
dir"/usr/X11R6/lib/X11/fonts/drakfont"
dir"/usr/share/fonts/default/Type1"

#
#alias'fixed'and'console'for'mono'
#(someprogramsaskfor'mono'iftheymean'fixed';)
#
matchanyfamily=="fixed"editfamily=+"mono";
matchanyfamily=="console"editfamily=+"mono";


#
#Checkusersconfigfile
#
includeif "~/.xftconfig"


#
#UseTrueTypefontsfordefaults
#Danny:disabled
#matchanyfamily=="serif"editfamily+="TimesNewRoman";
#matchanyfamily=="sans"editfamily+="Verdana";


#
#Uselucidaconsoleasdefaultfixedtypefont
#andsetthespacingof"mono"to100,this
#fixesbrokenfontswhicharefixed,butdonot
#setmono-spacing.
match
anyfamily=="mono"
edit
family+="lucidaconsole";
spacing=100;


#
#AliasbetweenXLFDfamiliesandfontfilefamilyname,preferlocalfonts
#
matchanyfamily=="Charter"editfamily+="BitstreamCharter";
matchanyfamily=="BitstreamCharter"editfamily=+"Charter";

matchanyfamily=="LuciduxSerif"editfamily+="LuciduxSerif";
matchanyfamily=="LuciduxSerif" editfamily=+"LuciduxSerif";

matchanyfamily=="LuciduxSans"editfamily+="LuciduxSans";
matchanyfamily=="LuciduxSans"editfamily=+"LuciduxSans";

matchanyfamily=="LuciduxMono" editfamily+="LuciduxMono";
matchanyfamily=="LuciduxMono"editfamily=+"LuciduxMono";


#
#TrueTypefontaliases
#
matchanyfamily=="ComicSans"editfamily+="ComicSansMS";
matchanyfamily=="ComicSansMS"editfamily=+"ComicSans";
matchanyfamily=="Trebuchet"editfamily+="TrebuchetMS";
matchanyfamily=="TrebuchetMS"editfamily=+"Trebuchet";
matchanyfamily=="Monotype"editfamily=+"Monotype.com";
matchanyfamily=="AndaleMono"editfamily+="Monotype.com";
matchanyfamily=="Monotype.com"editfamily=+"AndaleMono";


#Danny:
#settheAAfordifferentfonts
#
#mostTTfontsdonotneedtobealiasedbetween
#8and15points,althoughthismightbeamatteroftaste.
match
anysize>8
anysize<15
edit
antialias=false;


#Danny:Courierlooksterrible,andI
#cannotgetmostcharacterstofitnicely
#intheirspace.SoIusecourier10pitch
match
anyfamily=="courier"
edit
family+="courier10pitch";


#thesearesymbols,andforsomereasonthisneedstobeadded!:

match
anyfamily=="webdings"
edit
antialias=false;
encoding+="glyphs-fontspecific";

match
anyfamily=="symbol"
edit
antialias=false;
encoding+="glyphs-fontspecific";

match
anyfamily=="StandardSymbolsL"
edit
antialias=false;
encoding+="glyphs-fontspecific";

match
anyfamily=="dingbats"
edit
antialias=false;
encoding+="glyphs-fontspecific";

match
anyfamily=="Cursor"
edit
antialias=false;
encoding+="glyphs-fontspecific";


#maybeariallooksbetterlikethis?:
match
anyfamily=="Arial"
anysize>7
anysize<15
edit
antialias=false;


#end

-----------------------------------------------------------------------------

4.1.4. Afterword

You've gone through all the steps, and verified that the "RENDER" extension
is available, but you don't perceive a difference? Well, maybe the
applications themselves just aren't there yet, and are not able to utilize
these new features. Mozilla and Netscape, for instance, are not able to yet
(as of this writing).

So how to know what does and does not make use of anti-aliasing? A quick test
is to use something like xmag, or gimp, and enlarge the text considerably.
Look for diagonal lines, and if they are clearly stair-stepped with no
softened edges. If so, then while anti-aliasing is technically available, it
is not being used. With anti-aliasing you should see gradients instead of
well defined sharp edges. You can compare this with xterm and "AA":

$xterm -fa charter -fs 14
-----------------------------------------------------------------------------

4.2. Redhat 7.x Differences

Redhat 7.0 introduced some changes to X configuration over previous Redhat
versions. It is also different from the stock XFree86 configuration as
addressed above. Notable differences:

*Both XFree86 3.3.6 and 4.x are included. If upgrading you may wind up
    with 3.3.6. The X configuration file is XF86Config for 3.3.6 and
    XF86Config-4 for 4.x. Of course, you'll need to know which is which for
    editing and configuration purposes.
   
*xfs is still handling all font duties. A default Redhat 7.x installation
    does not use the 'modules' section of XF86Config. Instead it relies on
    xfs. This is different from a stock installation of XFree86 4.x where the
    X server does all the font work -- including TrueType.
   
*The socket for xfs is "unix/:7100" with RH 7.x, as opposed to "unix/:-1"
    in previous versions.
   

-----------------------------------------------------------------------------
5. Adjusting Fonts in Specific Applications

5.1. KDE

KDE is one of the best things that have happened to Linux and X in a long
time. It provides a consistent user interface that goes a long way towards
making Linux accessible to the average non-geek. More information about KDE
can be found at [http://www.kde.org/] http://www.kde.org/. So why am I
singing it's praises here? This is because KDE 1.1 has a new feature that
will make the fonts and colors in your programs, including non-KDE
applications consistent with KDE's current style.
-----------------------------------------------------------------------------

5.1.1. Applying KDE Fonts and Colors to non-KDE Applications

This is very easy. Simply start up the KDE Control Center, go to Desktop, and
go to Style inside Desktop. In there, there will be a toggle switch labeled
"Apply fonts and colors to non-KDE apps". Turn it on, click OK, and your
done! The next time you start up many X applications, they will use the same
colors and fonts that your KDE applications do. Some people may like this
feature better than others, but if you don't like it you can always turn it
off.
-----------------------------------------------------------------------------

5.2. Netscape

Let's face it, Netscape is an important application in Linux. We all use it,
and we all need it, so let's look at it specifically for a minute. An out of
the box Netscape installation is prone to the font problems we've discussed
-- large fonts that get pixelized, splotchy looking fonts, fonts so small
they are unreadable. In short, ugly. Maybe this is why you are here? 

Hopefully, at this point you have followed the above suggestions. These steps
can help greatly. TrueType font availability is almost a necessity, and you
need a TrueType font server for this. Many web pages specify font families --
like Arial -- that are not typically available to Linux users. This is bad
design, but having some of the basic TrueType fonts available will help
greatly in overcoming the short-sightedness of some designers. Microsoft --
can't live with 'em, can't live without 'em. 

Assuming you have TrueType working, from the Netscape menu select Edit ->
Preferences -> Fonts. Open the Variable Width Font droplist on the right side
of the window. Your TrueTypes should be there along with other fonts. Choose
which ever one suits your fancy as the default. Check the Allow Scaling
checkbox too. If the available point sizes are 0 and 12, you can go down and,
and enter your desired point size in the box to the right and click on the OK
button. The down-side to this is that Netscape will not remember these
settings, and you will have to do this each time you start Netscape. Unless
-- you have fonts.alias set up already. Then this will solve these problems.
See Section 3.4 for more on fonts.alias. 

You might consider experimenting with some ~/.Xdefaults (or perhaps it's~
/.Xresources on your system) settings too:

   
    Netscape*DocumentFonts.sizeIncrement:10
    Netscape*documentFonts.xResolution*iso-8859-1:120
    Netscape*documentFonts.yResolution*iso-8859-1:120
    
   
The 'sizeIncrement' controls how much of a jump Netscape makes when different
'basefont' sizes are specified ala: 

<basefont size=7>

for instance. The default is '20', which is a pretty good jump. Changing this
can help Netscape from scaling to too large and too small of a font. The x
and y resolutions are roughly equivalent to 'dpi' settings. Any random number
within reason can be used here. Experiment.  

Then run:

$ xrdb -load ~/.Xdefaults

(or .Xresources as the case may be) and restart Netscape. There are many
settings that can be tweaked or altered this way. Look at the Netscape.ad
(app defaults) file that should be included with Netscape packages.

If this approach does not get the job done as far as the 'tiny fonts' problem
in Netscape, then see the fonts.alias section above. You can really fine tune
many things with this approach.  

Mozilla configuration should be roughly the same. You might find, however,
that Mozilla does a better job of handling fonts in X, and pages will look
better overall.
-----------------------------------------------------------------------------

6. Odds and Ends

6.1. Notes

*Unfortunately there is no unified font handling system for Linux. You
    will have to configure each individual program so you can use TrueType,
    Type 1 or fonts that pique your fancy. And each program may well have its
    own way of doing this so you will have to RTFM. Desktop Environments like
    Gnome and KDE may provide much of this functionality.
   
*Most GUI apps should be able to use TrueType, and Type 1 fonts too.
    Wordperfect for Linux, however, cannot use TrueType. (See the links
    section below for more on Wordperfect.) Text editors, terminal programs
    and the like need fixed width fonts, and do not play well with TrueType
    or other scalable fonts.
   
*Though not discussed here, Type 1 fonts provide many of the same benefits
    as TrueType and are historically better supported in the Unix world. You
    likely have many of these installed already. Unfortunately however, Type
    1 are not a web standard like TrueType. But they are suitable for many
    other purposes. They are where it's at for printing. See [http://
    www.ghostscript.com/] ghostscriptfor more on this.
   
*While it is possible to specify a default point size for the xfs font
    server, very few applications will actually use this value.
   
*Abiword comes with a suite of fonts, called 'Abisuite'. Apparently, some
    of these fonts have the same names as some of the well known MS TrueType
    fonts: Arial, etc. And apparently, these are of much less quality. And
    because of the way X searches for fonts, it may find these first and use
    these, even if the 'real' ones are installed and may be the preferred
    choice. The solution is to uninstall 'Abisuite'.
   
*The new Xft rendering extensions of XFree86 4.x will mostly supplant
    similar features as provided by xfs, and older XFree86 extensions. For
    instance, font aliasing should be done in XftConfig if the new extensions
    are being used. This would only be true where the application is built
    against a toolkit (like QT or GTK) that supports the new extensions. At
    this time, there are not many apps that do support this yet.
   

-----------------------------------------------------------------------------
6.2. Links

*The Video Timings HOWTO, the ins and outs of getting the most from your
    monitor.
   
*[http://www.linuxdoc.org/HOWTO/Font-HOWTO.html] Font HOWTO Many good tips
    for installing fonts and for applications such as StarOffice, Applixware,
    Wordperfect, Ghostscript, TeX/LaTeX.
   
*A [http://www.moisty.org/~brion/linux/TrueType-HOWTO.html] TrueType
    HOWTO, good tips for printing, and a few application specific tips.
   
*[http://www.dcs.ed.ac.uk/home/jec/programs/xfsft/] xfsft Homepage,
    TrueType font support for X. This is the origin of the "freetype" font
    module for XFree86 4.x, and Redhat's xfs. Good site, and good links to
    other information related to fonts and TrueType.
   
*[http://home.c2i.net/dark/linux.html] Some Linux for Beginners. Great
    font site, and other Linux topics. Covers many of the topics discussed
    here in more detail. Some font and other tips for Mozilla: [http://
    home.c2i.net/dark/My_Mozilla_FAQ.html] http://home.c2i.net/dark/
    My_Mozilla_FAQ.html.
   
*[http://X-TT.dsl.gr.jp/] X-TrueType Homepage, and yet another TrueType
    Font server, especially good for Japanese, Chinese and Korean character
    sets.
   
*Tips on font size problems from [http://help.netscape.com/kb/consumer/
    19960513-54.html] Netscape.
   
*Wordperfect for Linux -- Fonts and Printers by Rod Smith, the author of
    Using Corel Wordperfect 8 for Linux from Que. Excellent information on
    Wordperfect and where TrueType fits in.
   
*[http://www.xfree86.org] XFree86 Project, the guys and gals who do an
    incredible amount of work to give us a killer GUI environment. Some info
    on fonts in [http://www.xfree86.org/4.0/fonts.html] XFree86 4.x.
   
*Microsoft Web Fonts direct from the Lion's den -- and they are free!
    These can be unpacked in Linux (see above).
   
*[ftp://ftp.rpmfind.net/linux/contrib/noarch/noarch/
    webfonts-1-3.noarch.rpm] Web Fonts RPM package, contains a few of the MS
    web browser fonts. [http://packages.debian.org/unstable/graphics/
    msttcorefonts.html] http://packages.debian.org/unstable/graphics/
    msttcorefonts.html is a similar package for Debian.
   
*Sebastiano Vigna's [http://freshmeat.net//webFonts4Linux] http://
    freshmeat.net//webFonts4Linux automates the downloading, extracting and
    installation of the Microsoft fonts all in one neat package.
   
*Freeware Connection -- Free Fonts Sites lots of links to lots of sites.
   
*Bitstream's Geometric Slabserif TrueType Font.
   
*Two converters for converting a Mac Font "suitcase" to a *nix compatible
    font: [http://www.macinsearch.com/infomac2/font/util/
    tt-converter-15.html] http://www.macinsearch.com/infomac2/font/util/
    tt-converter-15.html and [http://www.netmagic.net/~evan/shareware/#
    TTFontConvert] http://www.netmagic.net/~evan/shareware/#TTFontConvert
   
*The Unicode HOWTO: [http://linuxdoc.org/HOWTO/Unicode-HOWTO.html] http://
    linuxdoc.org/HOWTO/Unicode-HOWTO.html
   
*  Two sources of 'free' TrueType fonts with large Unicode support are
    Bitstream Cyberbit, which covers Roman, Cyrillic, Greek, Hebrew, Arabic,
    combining diacritical marks, Chinese, Korean, Japanese, and more, and is
    available from [ftp://ftp.netscape.com/pub/communicator/extras/fonts/
    windows/Cyberbit.ZIP] ftp://ftp.netscape.com/pub/communicator/extras/
    fonts/windows/Cyberbit.ZIP. And Lucida Sans Unicode, which is included in
    IBM's JDK 1.3.0beta for Linux, and covers Roman, Cyrillic, Greek, Hebrew,
    combining diacritical marks. This can be downloaded from [ftp://
    ftp.maths.tcd.ie/Linux/opt/IBMJava2-13/jre/lib/fonts/] ftp://
    ftp.maths.tcd.ie/Linux/opt/IBMJava2-13/jre/lib/fonts/ as
    LucidaSansRegular.ttf and LucidaSansOblique.ttf. Thanks to Tzafrir Cohen
    for these references. He also has a nice page on Hebrew fonts and related
    topics at [http://www.iglu.org.il/faq/?file=133] http://www.iglu.org.il/
    faq/?file=133.
   

